彈性擴散模型之模型配適度研究
A Study of the Model Fitness for Flexible Diffusion Models
國立中正大學企業管理學系(Department of Business Administration, National Chung Cheng University);大眾電腦公司業務專員(Marketing Analyst, First International Computer, Inc.)
摘要
銷售預測向來被認為是攸關企業成功與否的關鍵因素之一。近年來由於企業誰出新產品的腳步遠遠超過了以往的水率,且產品生命週期縮短,因此創新擴散模型的研究又再次地引起了學術界廣泛的注意。然而過去三十年間所發展出的模型數目之多,已經使得實證研究的工作遠遠地落後模型發展的速度。研究者應該要有系統地檢驗各種擴散模型,找出具最佳配適度(Model fit)的模型。本研究將針對20種不同的彈性擴散模型進行實證研究,再以後設分析法分析比較各模型的配適能力。研究結果有二:1、如應用三參數水準的彈性擴散模型來進行產品銷售量的預測即可獲致良好的模型配適度,如果繼續增加參數水率的話,則應採用五參數水率下,研究的完整模型才能獲得配適度的顯著提昇。而在三參數水率中,最佳的模型唯有修正後的NUI模型一種,亦即研究設計中的模型9。2、產品別因素的確對彈性擴散模型間的配適度造成顯著的差異,這項研究結果與Sultan, Farley與Lehmann (1990)所做的實證研究結果一致。由於產品不同會造成模型配適度間的顯著差異,因此可判定彈性擴散模型無法將產品特性列入考量,適用於所有產品的創新擴散預測上,因此將產品特性列入擴散模型中有其公要性。
Abstract
Sales forecast has always been considered as one of the key success factors of a company. In recent years, the studies of the Innovative Diffusion Model has regained the researcher's attention in the academic circle, due to the ever- fast speed of new product development and the shortening of product life cycle. As a result of numerous models developed in the past thirty years, the path of empirical research has been far behind the progress of the model development. Therefore, one of the major tasks for researchesr was to examine the Innovative Diffusion Models, and find out the model most-fitted. An empirical research on twenty innovative diffusion models were conducted through comparisons in this sutdy. The major findings of the study were: (1) the degree of model-fit could be improved by using three parameters; however. The levels of fitness would be significantly increased when five parameters were adopted. A good model by using three parameters could only be attained through modification, as represented by Model 9-NUI Model. (2).The individual differences among products did play an important role in deciding the fitness of a model. This finding was consistent with the results of the empirical research by Sultan, Farley and Lehmann (1990). As a result, it was essential that the characteristics of a product be incorporated into the model for a better result of sales forecast to be attained.
關鍵詞
- 類型
- 論文
- 期刊
- 臺大管理論叢
- ISSN
- 1018-1601
- 卷期
- 14卷1期
- 出版
- 2003年12月
- 頁碼
- 179–216
- 編號
- NTUEJ00010358
同期目錄
- 審計品質與自願預測公司裁量性應計數張文瀞(Wen-Jing Chang);周玲臺(Ling-Tai Lynette Chou);林修葳(Hsiou-Wei William Lin)・頁 001–046
- 住宅負擔能力惡化之再檢視-台北市住宅市場分析陳明吉(Ming-Chi Chen);蔡怡純(I-Chun Tsai);張金鶚(Chin-Oh Chang)・頁 047–078
- 資訊管理專業人員之專案團隊認同與其工作壓力及工作滿足之關係葉桂珍(Quey-Jen Yeh);汪美香(Mei-Hsiang Wang)・頁 079–118
- 影響新產品預告發訊時間之因素:先制優勢與先制風險分析顧萱萱(Hsuan-Hsuan Ku);陳美芳(Mei-Fang Chen);郭建志(Chien-Chih Kuo)・頁 119–147
- 穩定型網路之組織因素對新產品發展績效之影響-以中衛體系製造廠商之構型管理為例佘日新(Peter J. Sher);張耀文(Y. W. Chang)・頁 149–177
- 彈性擴散模型之模型配適度研究何雍慶(Yung-Ching Ho);蔡仲宜(Zone-Yi Tsai)・頁 179–216
- 企業採用創新技術之影響因素-以WAP應用為例郭更生(Geng-Sheng Kuo);別蓮蒂(Lien-Ti Bei);商倩鳳(Cian-Feng Shang);張洪瑞(Hung-Jui Chang)・頁 217–261
- 考量信用風險下備兑型認購權證之評價周麗娟(Li-Chuan Chou);陳勝源(Shen-Yuan Chen);楊朝成(Chau-Chen Yang)・頁 263–289